Apply BoltLube liberally! Wetter is better.

 

AR style rifle bolt carrier groups, and others, burn off lubes quickly.  Many products turn to sticky goo after just a few magazines.  BoltLube™ resulted from frustration with commercial products, and it:

  •  Stays where you put it, like rails and rings of an AR bolt
  •  Not get gummy or sticky like that "three letter" stuff
  •  Suspends carbon and Direct Gas Impingement residue
  •  Flows when cold, stays viscous when hot
  •  LUBEs better - uses METAL-PENETRATING-LUBRICANT   
  • Print

BoltLube has TWO PARTS:

 1. Premium full synthetic, but thick oil for IMMEDIATE LUBRICITY

 2. Long term METAL-PENETRATING LUBRICANT

made in usa

In fact, the metal-penetrating-lubricant soaks into the metal parts with the heating and cooling cycles.  It does not change the base oil, and is not an oil "additive".  BoltLube's active metal-penetrating-lubricant does NOT contain PTFE (Teflon), Moly (MoS2), PAOs (PolyAlphaOlefins), graphite, coal tar constituents, inorganic or metallic salts like zinc, phosphorous (as Zinc Dialkyl Dithio Phosphate, ZDDP), or chlorine (as chlorinated paraffin extreme pressure "EP" additives).  So you will see nothing sedimenting out of the high-viscosity base oil!  Since no covalent bonding occurs with the base metal, there is no permanent chemical change to the treated metal.  The metal-penetrating-lube is retained in the pores of the metal, and seeps out to prevent carbon or coke deposits (a real problem for ARs!). 

Don't run any firearm without lube, but we shot with an absolutely dry bolt, after using BoltLube for a few weeks.  Bottom line, you get metal-penetrating lubrication, great protection in cold and hot with superior suspension of dirt and carbon, just what we need for AS15s, M16s, M4s, AR10s, LR308s, and all manual bolt, piston and DGI rifles.


Money Back Guarantee Try it today AT NO RISK, if it is not everything we say, return with your receipt for your money back!  See details in our Limited Warranty below...

Our base oil:  

Density, g/ml @ 15.6°C ASTM D445  =  172.3
Flash Point ASTM D92  =  417°F
Effective protection  =  above 300°F
Multi-Grade  =  SAE 20W-50 Full Synthetic Base
Industry standards  =  API SJ, CF, and JASO-MA
Viscosity Index (VI)  =  142 (similar to a hydraulic suspension oil)

BoltLube - Binary happiness for your rifle...

Recent Review ...  running my Bushmaster AR15 shorty at the estate today... it's running solely on BoltLube... as well as the S&W M&P AR-style  .22 caliber... i like the way it flows, and will track... just by tilting the weapon ar parts, it seems to go right where you want it to and stay put... i run them wet too, and this morning it hasn't made it down the magwell like most lubricants... and i think today would be a bad day for lub***late... also, in the warm house... Ho**e's oil would have easily been relocated by this morning... u seem to have a simple cost effective solution to a larger problem... pretty cool, or "groovy" as a hippie would say...

SATISFACTION GUARANTEED or your Money Back!

LIMITED WARRANTY If this product fails to meet your expectations, please return it with receipt for a full refund.  All other warranties are disclaimed to the fullest extent permitted by law.  Georgia Gun Training, LLC shall not be responsible for any special, incidental, or consequential damages resulting from the use of this product.

Blended and packaged in Ball Ground, Georgia, from oil, lubricant, and containers
MADE IN THE USA, by your friends at GeorgiaGunTraining.com

Copyright 2012 Georgia Gun Training, LLC           Contact us at  This e-mail address is being protected from spambots. You need JavaScript enabled to view it.